From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle.Thank you for purchasing Parrot CK3000, the hands-free kit with voice recognition equipped with BluetoothTM radio.
Parrot Ck3100 Instructions Full Duplex HandsFull duplex hands-free conversation with echo cancellation and DSP.
Automatic mute of the car radio and connection to the speakers of your vehicle. If your CK3000 was installed by a professional, go directly to the next section, the Connection Phase. The CK3000 consists of an electronic control box, a microphone, a keypad with On and Off buttons and two ISO car. Do not install the control box close to the heater or the air-conditioning system. Avoid enclosing the unit inside of metal components - this will adversely affect. Parrot Ck3100 Instructions Driver And ShouldThe microphone should be directed towards the driver and should preferably be installed in between the visor and rear-view. We recommend you install Keypad in an easily accessible place, preferably on a clean, flat surface. ![]() Check that the red and green lights come on and go off according to the position of the ignition key. Connect the mute cable and power cable female connectors to the car radio. Connect the vehicle speaker and power harnesses to the male connectors. If the car radio has a Mute input, connect the yellow wire on the mute cable to one of the Mute in inputs 1, 2 or 3. Parrot Ck3100 Instructions Manual To DetermineConsult the car radio manual to determine the location of the mute input. Check the electrical diagram of the car radios ISO power harness. On some vehicles, the positions of the red and orange wires must be. Do not connect the orange wire to the 12V permanent, you run the risk. A specific adapter harness for the vehicle (not supplied) may be used. ![]() IMPORTANT: CK3000 operates only when ignition is switched on. IMPORTANT: Before using CK3000 you must pair it with your phone. Switch on your phone, turn the key in the car ignition and two indicator lights on the keypad should light up to indicate your. The display reads Parrot CK v, press Select to make the connection.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |